How to maintain electric clippers

the use of electric scissors, should be every few teeth between the blade drop a small amount of cutting oil, so that the blade to maintain good working condition. Note that due to the fast cutting speed of the blade, do not use hair oil, lubricating oil or mixed oils containing kerosene and other solvents, because these oils will volatilize or break down impurities containing viscosity, affecting the movement of the blade.

1, the use of electric scissors, should be every few teeth between the blade drop a small amount of cutting oil, so that the blade to maintain good working condition. Note that due to the fast cutting speed of the blade, do not use hair oil, lubricating oil or mixed oils containing kerosene and other solvents, because these oils will volatilize or break down impurities containing viscosity, affecting the movement of the blade.

2. How striped hair and missing hair appear during hairdressing is caused by the sticky surface of the blade, so clean the blade immediately and add oil properly.

3, each time the use of time should not be too long, and pay attention to the use of the knife can not be too large, so as not to burn the coil. When the temperature of the coil is too high, it should be stopped.

4, the edge and gap of the upper and lower blades, easy to hide dandruff, dander, dust or other debris, after each use, use a small brush to clean up. Because the hair debris and the curing of the skin oil will hinder the movement of the scissors and its sharpness, it should be often brushed to remove the debris remaining on the cutting edge.

5, do not use water to wash or bring into the bathroom to use, long-term use, should be stored in a dry, ventilated environment to extend the service life.